Pannkoke 7211-DS2 600kg Glass Vacuum Lifter
The battery-powered Kombi 7211-DS2 allows you to move loads of up to 600 kg. The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees throughout the tilting range.
The battery-powered Kombi 7211-DS2 has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155. Use of 2-circuit technology means that the battery-powered Kombi 7211-DS2 has two independent vacuum circuits. Each vacuum circuit is designed so that it can support twice the nominal load on its own, if one of the systems fails, or if there is a loss of power, you receive a warning.
Each suction cup can be individually locked.
The battery-powered vacuum pump does not require a power supply, so that the battery-powered Kombi 7211-DS2 can be used anywhere.
Specifications
- Safe working load capacity (smooth, clean surface at 60% vacuum): 1200kg (with extension arms and 16 pads fitted)
- Number of suction cups: 16
- Suction cup description: black rubber, not abrasion resistant, heat resistant up to 100˚F
- Suction cup diameter: 330mm
- Suitable for lifting: smooth, gastight / non-porous material e.g. glass, plastic boards, ceramic plates, sheet metals, coated boards
- Weight of lifter: approx 220kg
- Depth of lifter: 300mm
-
Load Movement:
- Rotation: 135° manual left & right lockable
- Tilt: 90° powered hydraulic
- Vacuum system: dual circuit; 2 or 4 pumps, 2 vacuum reserve tanks
-
Voltage:
- Pump: 12v DC from rechargeable battery;
- Battery charger: 110v/240v 50/60Hz single phase factory selectable
-
Standard accessories:
- Cable remote control
- Extension arms with pads (increasing capacity from 600kg to 1200kg)